Learning The Secrets About

How to Find Hidden Piping and Valves

If you are a homeowner then you need to know the details of your home like the back of your hand. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.

In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.

There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.

In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.

With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.